Nerf rocket launcher - Confetti cannon, candy gun, antenna aerials - Air fill

Description

This auction is for ONE (1), refillable, re-usable, pneumatic launcher, with a 2" Clear PVC barrel.
The barrel is a special grade of non-plumbing PVC, that is chemical, UV and shock/shatter resistant.
The UV protection gives it a bluish or purple tint, but yes, it is clear so you can see what it inside it!
It can be refilled with air from any source, and refilled thousands of times.
This is a one shot per fill, high volume, low pressure, pneumatic launcher.
Pressure rated, shatterproof Aluminum air chamber and air blast valve.
Stainless steel, liquid filled, shock and vibration resistant gauge,
Simple tire type Shrader valve, like a valve stem, so it's easy to fill.
Brass manifold, and factory set 125 PSI safety pop.
Please read carefully!
There is typically a 5 day handling time, as these are hand built to spec, in the U.S.A., then tested and painted before shipping!
One launch per air fill!     -   Refillable thousands of times, and they last for years with no parts or maintenance.
This the newest revision, Revision 9.5, designed for filling with air, or CO2 with optional adapters..
It is equipped with a brass, tire type Schrader valve, for filling from any air source that has an tire chuck.
You load the barrel, add the air, push button to launch, then repeat.
This launcher is designed be reused and refilled thousands of times by the attached tire type Schrader valve, with a manual tire pump, 12v mini compressor, home air compressors.
Some people use paintball, airsoft, Scuba, HPA, portable air, & CO2 tanks with the proper adapters.
Load, add air, launch. -Repeat.
Load, add air, launch.
Plain old air from a tire pump or compressor is nearly free.
A Ryobi 18V mini compressor fills from 0-125 PSI in around a minute!
CO2 from a 20 pound bulk bottle adds about twenty cents per shot.
CO2 from a paintball cylinder adds about fifty to seventy five cents per shot.
CO2 from bike tire inflators, 2-12 grams, add about .00 per launch.
This model can use any air source, 125 PSI max.
Remember: ALL air fill launchers, regardless of the manufacturer, are ALL only one launch per air fill.
We also have the more expensive ones, that use a bottom line mounted CO2 cylinder to quickly recharge the launcher on the fly!
Note* This is not a real launcher or weapon, nor is it capable of being converted into one.
This is a safe, soft item launcher that uses low pressure air, to propel soft NERF rockets, loose candy, confetti, color run cornstarch, ect.
It is much safer than many homemade designs that may use PVC or plastics for the air chamber. Plastic or PVC chamber are known to explode without warning,
- that's why homemade launchers are not allowed at any public venue or any insured event.
We have more pictures and videos of our designs on FB jjmultilaunchers page.
This listing meets all E-bay guidelines.
This is considered a recreational device and in some cases a TOY.
It is not, was not, and cannot be made into or modified into any real weapon.
It will be lightly disassembled and sold in a kit for liability reasons.
The buyer agrees to hold harmless the seller and E-bay for any harm or damages cause by this device.
Thank you for your support!
*Notes:
I love all of the designs that are out there, but I am offering a safer alternative as more and more places continue to ban homemade launchers.
It is illegal, per OSHA, to use PVC to hold air for any amount of time, even for testing, and that is why they are prohibited at public fields or venues.
The ban now includes PVC valves, like the common Orbit and Toro valves we all loved and were much tougher in the past.
Ozone, sunlight, paint, thinner, sanding, scratching, dropping, and repeated stress from filling can eventually cause them to fail, and without warning.
After just a few serious injuries, at major sporting events, 'probably safe' isn't safe enough when the public, and insurance companies are involved.
I want to see everyone's awesome designs succeed, so if you DIY, please use a safer, metal, air storage chamber and remember, no PVC can be used for pressure holding parts.
Track Page Views With
Auctiva's FREE Counter